How to fit an led driver

 · How to install a dimmable driver On the DC (output) side, you’ll connect the positive and negative wires to the LED Light Strip (or other low voltage lighting product). On the AC (input) side, you’ll connect the neutral and ground wires directly to the power source. The live wire from your household power source will connect to the Reviews: 2. Find replacement LED drivers for sale for your commercial needs. Get LED drivers with same day shipping from Lighting Supply.  · The majority of LED lighting products use an electronic driver that functions similarly to a fluorescent ballast. The driver converts incoming alternating current (AC) to direct current (DC) and drives this current to the LEDs. If the LED driver fails prematurely, it may need to be replaced in the field. The driver is typically mounted in the luminaire, although it may be remotely mounted in Estimated Reading Time: 5 mins.

A quality LED light strip installation that includes a dimmable driver is far superior to plug-in dimmers, and allows your lights (in some cases) to be controlled by higher end automated dimmers that can connect to your security or home automation systems. LED drivers should always be paired with LED bulbs that use 80% of their maximum rated wattage. For example, if your external driver can operate a maximum of watts, it should only operate LED light bulbs that use 96 watts. The driver you need depends on how many bulbs you want it to power multiplied by the wattage. It’s also advised the total wattage of all bulbs combined doesn’t exceed 80% of the transformer’s wattage. So if you choose to power 4 x 4W MR16 bulbs (16W total) from one driver, you’ll need a 20W driver. If you want to power 4 x 6W MR16 bulbs.

7 thg 2, Assuming you do, you just connect the mains at the PRI side, with the neutral wire connected to the side marked N and the Line wire connected to. That is a "driver". These are small LEDs which are able to use a plain resistor for that, built into the strip. They are driven by a 12 or 24 volt constant. Please take the time to read this installation guide before you install this Philips LED product and driver. The guide contains important information.